Pack Nest
RFID Blocking Passport Sleeves, 5 Pack, Slim Passport Protector
RFID Blocking Passport Sleeves, 5 Pack, Slim Passport Protector
Couldn't load pickup availability
Product description
PACIFIC WT TRAVEL SECURITY
Shielded passport. Out in one move.
Most passport sleeves are cut a little too tight and start tearing by the second trip. This one is built the other way round: a generous 100 x 140 mm body, an aluminum shielding layer bonded inside, and a thumb notch that slides your passport out in a single motion.
Aluminum bonded layer for RFID protection
A hydrophobic matte outer skin protects your passport from spills. An aluminium shielding layer sits inside, built to block the 13.56 MHz frequency that e-passport chips, contactless bank cards and hotel key cards use. Cheap sleeves spray a thin metallic film onto one side, which cracks along the fold after a few trips. A bonded layer does not.
Five sleeves pack, share with the whole family
Business travel
Slim enough to live in an inside jacket pocket. Hand it over at the desk without breaking stride, and nothing in your bag looks worth taking.
Family trips
Five in a pack covers two parents and three children, or a couple with spares for vaccination cards and secondary travel documents.
Students abroad
Hostel dorms, shared lockers and long coach journeys. A plain matte sleeve draws far less attention than a bright passport cover.
Everyday carry
Keep one at home for the passport in the drawer. Commuters and retirees use them for transit cards and contactless bank cards too.
Same shielding, two shapes. Pick the one that fits what you carry.
| Designed for Passport booklets, universal compatibility | Designed for Bank cards, ID, work badges and hotel keys | Designed for Bank cards, ID, work badges, hotel keys and passports |
| Sleeve size 100 x 140 mm (3.9 x 5.5 in) | Sleeve size 90 x 58 mm (3.54 x 2.28 in) - fits standard cards | Card Size 86 x 54 mm (3.38 x 2.13 in) - standard card format |
| Blocking Technology Aluminum shielding layer - blocks RFID and NFC signals | Blocking Technology Aluminum shielding layer - blocks RFID and NFC signals | Blocking Technology Active Electronic Jamming - blocks RFID and NFC signals |
| Quick access Thumb notch on the top edge | Quick access Side thumb notch for one-finger release | Power Source Passive Energy Harvesting - no batteries required |
| Finish Matte black, water and tear resistant | Finish Matte black, water and tear resistant | Finish Matte black, water and tear resistant |
-
Will it fit a well-travelled passport with extra visa pages?
Yes. The sleeve is 100 x 140 mm against the 88 x 125 mm ICAO TD3 booklet standard, which leaves 12 mm of width and 15 mm of height spare. That margin is there specifically so a thick, well-stamped book still slides in without forcing the cover.
-
How do I know the RFID blocking is actually working?
Test it yourself in five seconds. Put a contactless bank card in the sleeve and hold it against any tap-to-pay terminal. The terminal should stay asleep. Remove the card, tap again, and it wakes up. Same card, same terminal, one variable changed.
-
Does it fit passports issued outside the United States?
It fits any booklet built to the ICAO Doc 9303 TD3 standard, which covers US, UK, EU and Schengen, Canadian, Indian, Japanese and Australian passports among others. A small number of older or diplomatic issues fall outside that standard.
-
Will it make my travel wallet or jacket pocket bulky?
No. It is a thin laminated sleeve, not a rigid cover, and it adds almost nothing to the thickness of the passport itself. It sits flat inside a travel wallet, a passport organiser, a money belt or an inside jacket pocket.
Share





